440C stainless steel flat bar [4mm x 40mm x 1000mm]

0 Rating
50,00 €
In Stock

440C stainless steel bar for knife blade making. It is annealed with a clean surface.



440C: This is the hardest of the 440 series. It holds a sharp edge. Ideal for hunting knives, edc knives and chef knives.

440C steel composition

17% Chromium (Cr). Added for increased wear resistance, hardness, tensile strength, and (most importantly) for corrosion resistance. Cr forms large, complex carbides. A steel with at least 13% chromium is typically deemed "stainless".

0,95-1,20% Carbon C. Present in all knife steels, it is the most important hardening element. Increases tensile strength and edge retention and improves resistance to wear and abrasion. Added in isolation, decreases toughness.

1% Silicon (Si). Contributes to strength. Like Manganese, deoxidizes and degasifies to remove Oxygen from molten metal.

0,50% Vanadium (V). Contributes to wear resistance and hardenability, and as a carbide former (in fact, vanadium carbides are the hardest carbides) it contributes to wear resistance. It also refines the grain of the steel, which contributes to toughness and allows the blad

0,40% Manganese (Mn). An important element, Manganese improves grain structure and contributes to hardenability, strength, and wear resistance. Improves the steel, deoxidizes and degasifies during the steel's manufacturing (hot working and rolling).

0,40% Molybdenum (Mo). A carbide former, prevents brittleness, and maintains the steel's strength at high temperatures. Improves machinability and resistance to corrosion. Present in many steels, and air-hardening steels (e.g. A2, ATS-34) always have 1% or more Molybdenum.

0,20% Nickel (Ni). Adds toughness. Present in L6 and AUS6 and AUS8. Nickel is widely believed to play a role in corrosion resistance as well, but this is probably incorrect. One more reason Ni is added to an alloy is that it creates brighter portions in damascus steels.

There are yet no reviews for this product.

Please log in to write a review. Log in